Powercopy (PC:EXE) DOS commandline parameters
Hint: Command line parameters, which are only available to the professional version are /ml /makelist /mlb /ktl /g(et). The transfer speed is the same.
All things you can do under the graphic WINDOWS dialogs you can do it using command line parameters and much more.PC.EXE {/r or /t <sourcepath or /check <listfile or /g <path} [/d <destinationpath] [OPTIONS]
You can easily get the dos syntax by watching the bottom of the Windows dialogs during select or change options.Hint: | is the or sign; [ ] optional not required; {} one has to be selected: <>has to be replaced file-, pathname
Read the entire documentation to see the whole power of this program!
- the following paramter is only available on the professional
version!
PC.EXE /makelist <filepath [OPTIONS /delete
/nosub]
[OPTIONS]
- - Base Program Parameters
- - one has to be selected
/r(eceive) Waits for receiving data from the sender.
/t(ransmit) Transmits <filepath> via
the parallel port.
/ml(make filelist) A powercopy filelist with CRC32
checksum
will be created.
/mlb Same as /ml except displaying the listed Files
in DRIVE:PATH\FILE
format.
/check checks the filelist '@FileLst.PC@' created by
/m... command.
/checkr checks the filelist '@FileLst.PC@' created
by /m...
command, but uses the relative pathoffset to check files.
/? for help.
- the following function /g
is only available
to the professional version! - -
- - File Server Functions - -
/g(et) <listfilepath>
transfers all files inside <listfilepath>\@FileLst.PC@.
/g(et) @Aliasname@ See detailed
description under
fileserverfunction.
[OPTIONS] - -
Options Start - -
/d(estination) only if source and destination folder
shall be
not the same.
If given with /r the /d of the transmitter(/t) will be
ignored.
/F+ File select criteria e.g. /F+ *.txt *.doc
- any files with name *.txt and *.doc
will be added
/F- File(s) deselect criteria e.g. /F- a*.txt b*.doc
- any files with name a*.txt and b*.doc
will not
be added
- the following function /kTL is
only available
on the professional version! - -
/kTL Keeps the transferlist '@To_Send.PC@'after
transmit.
/nosub (no subdirs)
Subdirectories are not transfered.
/AED Transmit also directories with no
filematch.(Add
Empty Directories)
/SF Shows current transmitted, received or
checked(/check
file.
/PT Protokolls every filetransfer to
'@TransLg.PC@'
/NoLfn Disable long filename support.
/InternalLfn Stores (L)ong (f)ile(n)ames
in internal ini-format(@Long_FN.PC@).
Default way to store lfn data on non Lfn OS's
/noInternalLfn Disables storing filenames
in internal
ini-format(@lfnini@).
see progam documentation for examples.
/delete in connection with /makelist all matching
files will
be deleted.
Attention: There is no warning!
/move in connection with /t -
Files will be deleted
after transmit.
/date<YYYY.MM.DD-<YYYY.MM.DD Year 2000
Tested!
/time<hh:mm:ss-<hh:mm:ss Only handle
those matching files.
/size<RangeFrom-<RangeTo Unit bytes
[OPTIONS] - -
Parallel Port Transfer Options
Start - -
/noECP HighSpeed disabled
/noEPP Medium Speed disabled. Currently
EPP is not supported
and
treated as bidirectional.
/noBidirect
Disallow bidirectional mode.
/noPNPscan
Disallow Plug and Play
scan.
/noSuperIOscan Disallow autodetecting
SuperIO
/noDosEnvscan Disallow Dos
Environment scan.
/noGoodLuckScan Disallow scanning of usually used
parallel Ports.
/noPNPscan Disallow Plug and Play scan.
/UsePxxx-Ix-Dx Uses the port,irq or dma
value and
o v e r r i d e s the a u t o
d e t e c t
e d values!! This should be
only used on incorrect working PNP-Bios
implementations,
or if you
have more than one parallel device in your PC.
If parallel portaddress is 0x378 enter /UseP378.
If current
Irq is 11
enter /UseP378,I11 . If current Dma is 0 enter
/UseP378,I11,D0
Each ECP-Parallel device must have one DMA channel
for
highspeed transfer.
/AllowEcpDma same as /Turbo
/Turbo Enables Turbo transfer Mode.
ECP-DMA-Channel will be used for Data Transfer if available.
/NoEcpFtDma nearly High Speed Disables
FTypeDmaTransfer!
/DMA-D /DMA-B /DMA-S /DMA-C Overwrites
autodetected DMA
mode.
-May cause system hangup! - see documentation
- - Options End - -
- - Defined
DOS-Errorlevels:
0Errorfree
1 Error on receiving data
10 /check CRC
Error
11 /check FileAccess Error
12 /check CRC Error and FileAccess errors
occured
220 ParallelInterface could not be configured.
228 /md or /cd
error
229 /md or /cd error
230 Directory creation error (/md or /cd /d)
235 File creation/renaming error
236DiskFull.
237 Unrecoverable Handshake Error
238 FileList generate or read Error
239 TimeOut on transfer handshake
240User-Break.
241 Receive error.
242 Transmit
error.
243 CRC error or missing.
250 Illegal destination filename detected.
251 Handshakeerror filename to long. 252
Needed directory
does not exist.
253 Parallel configuration error.
254 Wrong programcall. Parameters missing, or called
with /?
/help..
All Errorlevels
between 100 and 155 are
caused from Communication Partner.
To see reason add 100
to errorlevel. E.g.
errorlevel 136 - 236 -
Communication Partner
says that it's Disk
is full!
For detailt description see The
Powercopy Help.