HowToSetup ECP on my computer

Several possibilities:

Setup ECP in your computer bios
read the information below
If it still will not work then use our PCCFGSIO.exe tool. See PC_FAQ.HTM site
for additional info see the PC_FAQ.HTM site.

Some Notebook/Desktop models are difficult to setup. If you think we should add your experience please add your modell to this page and send us the modified files. Thank you!
Compaq
General Note-1	Some of the models below require a utility program Setport.exe( usage: setport 4), which turns the printer port into the ECP mode, from Compaq called SP2158.EXE for the following models 1) Contura Aero 2) LTE Elite (only Medium transferspeed is supported by this ) 3) Contura 400 Series 4) LTE 5000 Series 5) Armada 1100 Series 6) Armada 4100 Series 7) Armada 3500 Series There may be more Compaq Notebooks which work with this tool! Dear Compaq, where are your Bios updates that users have less problems with your systems. Where is the NT/2000 Version of this tool. The compaq customers pay a lot of money for such incompatible systems and should become a good and error fixed bios. Did you ever run the ECP complience test from Microsoft there?
General Note-2	The following Professional Workstation models can configure the ECP printer mode in the COMS menu 1) 500 series 2) 600 series 3) 800 series The configuration procedure - Boot the unit - After the memory count, you will hear a beep and cursor will move to the right top corner; press F10 - Select COMPUTER SET UP - Select BUILT IN DEVICES - Select COMMUNICATIONS - Verify that BI-DIRECTIONAL, EPP, ECP setting is set to ECP - Select OK - Select CLOSE - Select FILE - Select SAVE CHANGES AND EXIT - Your unit will reboot
General Note-3	1) DestPro 2000 1) DestPro 4000 1) DestPro 6000
A lot of the Armada Models need to uses this tool.	1) Download from Compaq a file called SETPORT.EXE and add in CONFIG.SYS, DEVICE=SETPORT.EXE 4 (4=ECP option) 2) In Device Manager under the System icon of the Control Panel, set up LPT1 as a ECP -Printer Port double-click on LPT1, click on the Driver tab of the Properties, click Update Driver, check "No, select driver from list", then Next, check "Show all hardware", under Manufacturers select "(Standard port types)" under Models select "ECP-Printer Port" click Finish, reboot
Prolinea 4100	Bios=Ecp
LTE 5100
LTE 5250
LTE 5380	and All LTE 5xxx models(?)
Professional Workstation 5000 Series	see General Note-2 for the ECP configuration
Professional Workstation 6000 Series	see General Note-2 for the ECP configuration
Professional Workstation 8000 Series	see General Note-2 for the ECP configuration
IBM
ThinkPad 701C
ThinkPad 760EL	Follow these steps to set the printer port to the EPP mode 1) Open the (ThinkPad Feature) window by selecting (Start on Taskbar) ->(Programs) ->(Accessories) ->(ThinkPad) ->(ThinkPad feature) 2) Now select either LPT2 or LPT3 3) Then select (ECP)
ThinkPad 365X	With IBM Utility